SSMaker, tool for creating seven segment constant
SSMaker.exe
SSMaker.exe is a program to help make a lighting table of seven segment.
Click on the segment to be switched on or off. After that, the table to form the light will be instantly displayed. Lights are represented by the value bit 0. To make the light represented by the value bit 1, check the Active High.
Constants for the number 5 is 92H (light = 0) or 6DH (light = 1)
By default, bit 0 is for segment A, bit 1 is for the segment b, and so on. But you also can change the order. Of course this arrangement tailored to the hardware. To determine the bits to its segments, right click on the segment to be determined its bit, then from pupop menu that appears, choose the number of bits.
Right-click on a segment for selecting bits for the segment.
If we use the bits that are being used by another segment, the segment which bits are used will be made to not connected to any bit. Signs that the segment is not connected to the bit is the segment which is marked with the letter X.
This program is a package of Microcontroller Project
Did you enjoy this post? Why not leave a comment below and continue the conversation, or subscribe to my feed and get articles like this delivered automatically to your feed reader.Please notice that comment or question submitted should match the topic.
5 Comments
Leave a comment
Sebelum membuat komentar, pastikan Anda telah membaca komentar-komentar sebelumnya. Jangan membuat pertanyaan yang telah ditanyakan. Perhatikan pula link-link dalam artikel. Lihatlah link tersebut sebelum membuat pertanyaan, karena mungkin penjelasan dari pertanyaan Anda telah di jawab dalam link tersebut.
duh..
sya bner2 kagum ma mas sulhan..
ju2r z..
sya dah sempet nyerah dg yg nama’a elektronika(pdhl sya kul jur t.elektro)
gr2 dosen dasar elektronika yg kurang brsahabat..
praktek d lapangan’a jd ancur..
pas lg buat rangkaian amplifier, gosong terus..duit abis banyak..
bner2 frustasi..
tp dg kata2 mas sulhan..sya jd pgn nyoba dr awal lg..
“Memang, untuk menjadi ahli, butuh waktu lumayan lama. Tapi, kalau hanya untuk sekadar bisa menggunakan mikrokontroler, satu atau dua hari saja sudah cukup! Mulailah dari yang paling sederhana, terus sedikit demi sedikit meningkat sampai yang rumit. Nanti, Jika Anda merasa mentok menghadapi masalah yang rumit, buatlah masalah menjadi sederhana. Jika Anda menghadapi masalah yang besar, buatlah masalah menjadi kecil. Jika Anda menemui bab yang sulit, jangan paksakan diri. Percayalah, suatu saat Anda pasti dapat memahaminya.”
subhanallah..
makasih mas..
makasih banyak..^_^
belajar terus ya
karena belajar itu wajib, sampai kita mati 
Betul kang sulhan, belajar terus ….
kalau utk konstanta led matrik ada tdak pak?
Ada, coba baca-baca semua artikel tentang matriks led. Baca dengan cermat termasuk komentar-komentarnya.